beautypg.com

Handbrake, Manual transmission, E set – BMW 650i Coupe 2006 User Manual

Page 61: Driving

background image

Driving

60

Manual transmission

1.

Briefly press the Start/Stop button with the
vehicle stopped.

2.

Shift into first gear or reverse.

3.

Apply the handbrake.

SMG Sequential Manual Gearbox*

1.

Apply the handbrake.

2.

Move selector lever into a drive position.

3.

Briefly press Start/Stop button.
If the transmission is in N when the engine is
switched off, you will be given an optical and
acoustic reminder.

Automatic transmission*

1.

Move the selector lever into position P with
the vehicle stopped.

2.

Briefly press Start/Stop button.

Handbrake

The handbrake is primarily intended to prevent
the vehicle from rolling while parked; it brakes
the rear wheels.

Indicator lamp

The indicator lamp lights up, and a sig-
nal also sounds when starting off. The
handbrake is engaged.
Indicator lamp for Canadian models.

Engaging

The lever engages automatically.

Releasing

Pull slightly upward, press the button and lower
the lever.

If it becomes necessary under special cir-
cumstances to use the handbrake while

driving, it must not be pulled too sharply. In
doing so, continuously press the button of the
handbrake lever. Otherwise strong application
of the handbrake can lead to overbraking of the
rear axle and associated 'fishtailing' of the vehi-
cle rear end.

<

To prevent corrosion and one-sided brak-
ing action, occasionally engage the hand-

brake lightly when the vehicle is slowly coming
to a stop if traffic conditions permit.
The brake lamps do not light up when the hand-
brake is engaged.

<

Manual transmission

When shifting into 5th/6th gear, press the
selector-lever toward the right, otherwise

an inadvertent shift into 3rd or 4th gear could
lead to engine damage.

<

Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG

This manual is related to the following products: