Stopwatch, Settings on control display, Set- tings on control display – BMW M5 Sedan 2008 User Manual
Page 76: Eve ryth ing un de r co nt rol
E
ve
ryth
ing un
de
r co
nt
rol
74
5.
Select the speed value and press the con-
troller.
6.
Turn the controller to set the limit. If
needed, hold it against a slight resistance
to enter a larger difference.
7.
Press the controller to apply the setting.
The limit is automatically activated.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
Activating limit
Select "On" and press the controller.
Limit is automatically activated.
Stopwatch
iDrive, for operating principle refer to page
.
1.
Open the start menu.
2.
Open "Navigation".
Without navigation system
*
:
Open "Car Data".
3.
Select "Car Data" and press the controller.
4.
Select "Stopwatch" and press the control-
ler.
Starting, stopping or resetting
>
Select "Start" and press the controller.
The stopwatch starts at the displayed time.
>
Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
>
Select "Stop" and press the controller.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
All of the other functions remain available
even while the stopwatch is running. The
stopwatch continues operation in the back-
ground.
<
Settings on Control Display
iDrive, for operating principle refer to page
1.
Press the
button once or twice until
the start menu appears.
2.
Press the controller to open the menu.
3.
Turn the controller until "Settings" is
selected and press the controller.
Online Edition for Part no. 01 41 0 014 238 - © 08/07 BMW AG