Replacing components – BMW M5 Sedan 2008 User Manual

Page 220

Replacing components

218

Please observe the best-by date on the
sealant bottle.

The M Mobility System consists of

1 Sealant bottle and sticker with speed limit
2 Filling hose from sealant bottle to wheel

Model with pressure gauge on hose*

3 Connector and cable for lighter socket
4 Mounting for sealing bottle
5 Compressor
6 On/Off switch
7 Pressure gauge for indicating tire inflation

pressure

8 Screw on pressure gauge for reducing tire

inflation pressure

9 Connecting hose for connecting compres-

sor and sealant bottle or compressor and
wheel

Connector, cable and connecting hose are
stored in the compressor housing.

Model with pressure gauge integrated
in housing*

3 Connector and cable for lighter socket
4 Mounting for sealing bottle
5 Compressor
6 On/Off switch
7 Pressure gauge for indicating tire inflation

pressure

8 Button for reducing tire inflation pressure
9 Connecting hose for connecting compres-

sor and sealant bottle or compressor and
wheel

Connector, cable and connecting hose are
stored on underside of compressor.

Using M Mobility System

To repair a flat tire with the M Mobility System,
proceed as follows:

Fill sealant into wheel, refer to page

218

Distribute sealant, refer to page

219

Produce tire inflation pressure, refer to
page

219

Filling sealant into wheel

Strictly comply with the specified order,
otherwise highly pressurized sealant

could escape.

Shake sealant bottle.

Screw hose

9 onto connection of sealant

bottle.

For model with pressure gauge on hose:
Make sure that screw

8 on pressure gauge

is closed.