BMW M5 Sedan 2008 - Manual (Page 196)

BMW
Assis
t
194
Blocking services*
If you block the services, the connection to
BMW Assist is deactivated.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
4. Turn the controller until "BMW Service set-
tings" is selected and press the controller.
5. Change to upper field if necessary. Turn the
controller until "Enabled services" is
selected and press the controller.
6. Select "Options" and press the controller.
7. Select "Terminate services" and press the
controller.
The use of BMW Assist is blocked, and the cur-
rent vehicle position will not be transmitted dur-
ing an emergency request
* . To cancel blocking
and reactivate BMW Assist, see below. This
does not affect the contractual agreements.
Reactivate BMW Assist if necessary to log on
again.
Activating BMW Assist
BMW Assist must be activated to use the ser-
vices.
Requirements
> Make sure that the vehicle can determine its
current position. Reception is best when
you have an unobstructed view to the sky.
> Leave radio readiness switched on during
the activation process.
Activating
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
Online Edition for Part no. 01 41 0 014 238 - © 08/07 BMW AG