BMW X6 xDrive50i 2008 - Manual (Page 70)

E
ve
ryth
ing un
de
r co
nt
rol
68
Everything under control
Odometer, outside
temperature display, clock
1 Knob in the instrument panel
2 Time, outside temperature, and date
3 Odometer and trip odometer
Knob in the instrument panel
> With ignition switched on
Press button:
Resetting trip odometer
Press the button for approx. 5 seconds:
Displaying service requirements, refer to
page
72
> With ignition switched off
Press button:
Briefly displaying time, outside temperature
and odometer
Units of measure
To select the respective units of measure, miles
or km for the odometer as well as
7 or6 for
the outside temperature, refer to page 79 .
The setting is stored for the remote control cur-
rently in use.
Time, date, outside temperature
From radio readiness the outside temperature
and the time are displayed.
Setting the time, refer to page
78 .
Retrieving date
Press the button on turn signal lever upward;
the date appears.
To set the date, refer to page
79 .
Pressing the button upward or downward sev-
eral times changes the display between clock,
outside temperature, date, and Check Control
messages, refer to page
76 .
Outside temperature warning
If the display drops to +37 7/+36, a signal
sounds and a warning lamp lights up. A mes-
sage appears on the Control Display. There is
an increased danger of ice.
Even at temperatures above +37 7/
+3 6 ice can form. Therefore, drive care-
fully, e.g. on bridges and sections of road in the
shade, otherwise there is an increased accident
risk.
<
Odometer and trip odometer
Resetting trip odometer:
Press button
1 in the instrument panel with the
ignition switched on.
When vehicle is parked
To briefly display the time, outside temperature
and mileage after the remote control has been
removed from the ignition lock:
Press button
1 in the instrument panel.
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG