BMW X6 xDrive50i 2008 - Manual (Page 222)

Telep
h
oning
220
Mounting/removing snap-in
adapter
1. Press the area 1 around the button and
remove the cover * .
2. Insert the snap-in adapter at the front and
press down until it engages.
To remove the snap-in adapter:
Press down on region
1.
Inserting mobile phone
1. Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
2. Push the mobile phone with the buttons
facing upward toward the electrical connec-
tions and press down until it engages.
The mobile phone battery is charged from the
radio readiness position.
To protect the vehicle's batteries, avoid
using the phone when the ignition is
switched off. <
Removing mobile phone
Press the button.
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG