Seat heating – BMW 535i xDrive Sports Wagon 2009 User Manual
Page 55
53
left and right. The belt buckle embossed with
the word CENTER is intended exclusively for
use by passengers riding in the center position.
Damage to safety belts
When subjected to strain due to an acci-
dent or in the event of damage, replace
the safety belts, the belt tensioners, and any
child restraint systems and have the belt anchor
points checked. Only have this work carried out
at a BMW center or at a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise cor-
rect operation of this safety equipment is not
guaranteed.
<
Seat heating*
Front
The appearance and arrangement of the but-
tons may vary depending on the equipment.
1 Seat heating, three LEDs
2 Seat heating, one LED
3 Seat heating with active seat ventilation
*
Press the respective button once per tempera-
ture level. The temperature level is shown on
the Control Display with buttons
2 and 3. The
maximum temperature is supplied when three
LEDs are lit.
The temperature is reduced and if need be, the
heating is switched off in order to reduce the
load on the battery. The LEDs remain lit.
To switch off: Press button longer.
Temperature distribution without
active seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page
1.
Open the start menu.
2.
Move the controller to the left to open "Cli-
mate".
3.
Select "Seat heater distribution" and press
the controller.
4.
Move the controller to the left or right to
select "Driver" or "Passenger".
5.
Turn the controller to adjust the distribu-
tion.
The setting is applied.
Temperature distribution with active
seat ventilation
The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page
1.
Open the start menu.
2.
Move the controller to the left to open "Cli-
mate".
Online Edition for Part no. 01 41 2 600 721 - © 08/08 BMW AG