Driving – BMW M5 Sedan 2009 User Manual
Page 64
Driving
62
shift paddles, or selector lever, then the system
shifts into N.
<
Gear changes
Using selector lever
>
To upshift, pull the selector lever back.
>
To downshift, push the selector lever for-
ward.
Using shift paddles on steering wheel
>
To upshift, briefly pull the right shift
paddle +.
>
To downshift, briefly pull the left shift
paddle –.
Drivelogic
With Drivelogic various driving programs are
available to you.
Each time you change between the Sequential
mode and the Drive mode, the respective last
program is active. Exception: after the first
change from the Sequential to the Drive mode,
driving program 3 is active.
In Drive mode
There are five different driving programs, rang-
ing from relaxed 1 to sporty/highly dynamic 5.
In Sequential mode
You can choose from six driving programs rang-
ing from balanced/dynamic 1 to sporty/purist 6.
Program 6 is only available when the DSC
Dynamic Stability Control is deactivated, refer
to page
. If DSC is activated, the system
switches from program 6 to program 5
To maintain vehicle stability, always acti-
vate DSC whenever possible.
<
Selecting driving program with button
in center console
Press the button repeatedly until the desired
driving program is displayed in the instrument
cluster, refer to page
Selecting driving program via button
on steering wheel
You can also activate your preferred driving pro-
gram with the button on the steering wheel,
refer to MDrive on page
With the ignition switched on you can set
MDrive on the Control Display.
iDrive, for operating principle refer to page
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "MDrive" and press the controller.
4.
Select "SMG Drivelogic" and press the con-
troller. The first setting is selected.
5.
Turn controller to set Drive mode or
Sequential mode.
"Unchanged" retains the current settings
made outside of MDrive.
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG