Safety belts – BMW M5 Sedan 2009 User Manual

Page 49

are triggered in a rear-end collision. Only have
this work carried out by a BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Otherwise, this safety equipment will
not function properly.

Please contact a BMW center if you wish
to have the front head restraints removed

and installed.

Front seats: height adjustment

Front seats: adjusting distance to the
back of the head

Forward: pull up.

Back: push the button and slide the head-
rest cushion toward the rear.

Do not place any objects behind the
headrest cushion. Otherwise, you can

impair the proper function of the head
restraint.

On seats with a shoulder support

you adjust

the distance to the back of the head with the
shoulder support, refer to page

Adjusting side extensions*

You can fold the side extensions on the head
restraint forward for increased lateral support in
the resting position.

Rear seats: height adjustment

To raise: pull up.

To lower: press the button, arrow

1, and

push the head restraint downward.

Removing

Pull the head restraint upward to the stop.

Press the button, arrow

1, and pull the head

restraint all the way out.

Safety belts

To ensure that the safety systems con-
tinue to provide optimized protection,

please observe the adjustment instructions on
page

Before every drive, make sure that safety belts
are being worn at all of the occupied seats. Air-
bags complement the safety belt as an addi-

This manual is related to the following products:

M5 Sedan 2010