Freedom Designs Freedom SP3 Mini - Manual (Page 44)

42
Freedom Designs, Inc. SP3 “Mini” Series
Troubleshooting
All SP3 “Mini” wheelchairs leave the factory inspected and adjusted for immediate use,
(aside from the unfolding procedure). This troubleshooting chart offers some sugges-
tions regarding the use of your wheelchair. Some areas may require more investigation
to find the most suitable solution for a specific problem. A complete inspection, safety
check and servicing should be made by an authorized dealer at least once a year. Any
Problems should be directed to your authorized dealer or call our customer service de-
partment.
Symptoms Remedies
The wheelchair veers right Check that both casters contact the ground at
the same time.
Check that the tire pressure is correct and
equal in both rear wheels.
The wheelchair veers left Check that both casters contact the ground at
the same time.
Check that the tire pressure is correct and
equal in both rear wheels.
Sluggish turn or performance Check that all nuts and bolts are tight.
Check that the tire pressure is correct and
equal in rear wheels.
Caster Flutter Check that all nuts and bolts are tight.
Check that both casters contact the ground at
the same time.
Check for wear of casters.
Squeaks and rattles Check that all nuts and bolts are tight.
Looseness in the wheelchair Check that all nuts and bolts are tight.