Freedom Designs Freedom SP3 Mini - Manual (Page 24)

22
Freedom Designs, Inc. SP3 “Mini” Series
Unfolding the SP3 “Mini”
Continued………...
4. Push the flip back armrests down to the flat
position.
Or insert optional T-arm into receiver socket
until it snaps into place.
5. Flip down the footplates or attach the footboard
and place in the “down” position.
6. Adjust anti-tip tubes to the safety (rearward)
position. (See page 27).
Note:
The SP3 “Mini” can be folded and unfolded while
the footrest hangers are attached. See pages 28
& 29.