Freedom Designs Freedom SP3 Mini - Manual (Page 29)

27
Freedom Designs, Inc. SP3 “Mini” Series
Main Frame
Anti-Tip Tubes
Anti-tip tubes come standard on the SP3 “Mini” .
These anti-tip tubes are not removable for your safety.
Swivel anti-tip tube adjustment:
1. When the anti-tip tubes are in the inward position,
swivel the anti-tip tube and turn outward to lock in
the safety position.
2. When the anti-tip tubes are in the safety position,
swivel the anti-tip tube and turn inward to lock out of
the safety position
Warning: Under normal use, anti-tip tubes will
prevent the wheelchair from tipping over backward.
Anti-tip tubes are to stay on the chair at all times
and should be locked into a safety position.
Wheels and Tires
The SP3 “Mini” wheelchair offers the following tire
options:
12” Pneumatic Mag Wheels
16” Pneumatic Mag Wheels
18” Pneumatic Mag Wheels
20” Pneumatic Mag Wheels or Spoke Wheels
Wheels may be removed from the chair by releasing the
quick release axles. (See quick release axles—page
33)
Check pneumatic tires weekly for proper inflation level,
listed on the tire sidewall. For wheel lock effectiveness,
proper tire inflation needs to be maintained.
No-flat inserts are available for most of the pneumatic
mag and spoke wheels
.