FLO~PRO 501001 - Manual (Page 8)

8 Maxx Flow Installation Manual • www.hsperformance.com
INSTALLATION CONTINUeD
14. Install intake manifold. If installing H&S Boost Tube, slide a supplied 4” clamp onto intake manifold
before installing. Slide bottom end of intake manifold into coupler and loosly install 2 long bolts (1
supplied) to hold intake manifold to head.
15. Press boost tube and intake manifold together. Center coupler between boost tube and intake
manifold. Slide clamps onto coupler and tighten.
16. Tighten factory clamp on intercooler.