FLO~PRO 501001 - Manual (Page 2)

TROUBLESHOOTING:
NOTE: You will have a check engine light and/or other problems unless using the
Maxx Flow with an H&S tuning device.
Please read and understand all installation instructions before proceeding with the
installation.
If you have questions during the installation of this product, please call H&S Performance
support at 1-888-628-1730
TABLE OF CONTENTS
ParTS LiST .................................................................................................................Pg. 3
iNSTaLLaTiON ............................................................................................................Pg. 3
WarraNTY & DiScLaiMEr ........................................................................................Pg. 11
INTRODUCTION
WarNiNg!
This high performance product is intended for off-road, closed-course racing use ONLY.
This product may never be installed on a vehicle registered for highway use. By installing
the H&S Maxx Flow onto your vehicle, you assume all risk and liability associated with its
use. It is your responsibility to ensure that your vehicle complies with all national, state,
and local emissions laws. Due to its high performance nature, the H&S Maxx Flow may
void vehicle manufacturer’s warranty. H&S Performance, LLC assumes no liability for mis-
use of its products. By installing the H&S Maxx Flow, you release H&S Performance, LLC of
any and all liability associated with its use. Any and all civil penalties for removing your
vehicles emissions equipment are the sole responsibility of the end user. Check your laws
before installing!
Maxx Flow Installation Manual • www.hsperformance.com