FLO~PRO 501001 - Manual (Page 3)

1-888-628-1730 • Maxx Flow Installation Manual 3
1. Unplug the MAP sensor - located on the back side of the intake manifold. Unplug the EGR throttle
butterfly harness - located on the bottom of the intake manifold (usually has a red locking tab).
• One H&S Maxx Flow Intake Manifold
• One 4” to 3” Reducing Coupler
• One 4” Clamp
• One OEM Intake Manifold Gasket
• One OEM Intake Manifold Bolt
• One H&S Dipstick Bracket
• One Dipstick Bracket Hardware
if you purchased an H&S Boost Tube
you will also get:
• One H&S Mandrel Bent Boost Tube
• One 4” Straight Coupler
• Two 4” Clamps
INSTALLATION
iNSTaLLaTiON
The h&S MAxx fLOw INTAke MANIfOLD MUST be USeD IN CONjUNCTION wITh AN h&S eGR
COOLeR DeLeTe (pART #301005 fOR 2009 - 2011 OR pART #301003 fOR 2007 - 2008) OR AN
eGR CROSSOveR pLUG (pART #301015).
pICTUReS AND INSTRUCTIONS weRe TAkeN fROM A 2010 DODGe. The 2007.5 - 2009 DODGe
INSTALLATION MAy DIffeR SLIGhTLy.
ParTS LiST