FLO~PRO 302202 - Manual (Page 16)

STEp 22
STEp 21
16 Ford 6.7L Powerstroke EGR/Cooler Delete Installation Manual
Remove the seven 8mm bolts holding the EGR system to the passenger side intake manifold.
Remove the 10mm nut holding the pressure line bracket to the back side of the EGR cooler.
Pull the EGR system towards the front of the truck. You may need to twist the EGR system slightly
counter-clockwise in order to clear the black intake “Y”. Once EGR system is pulled slightly forward,
there is a clip holding a wiring harness to the back side of the EGR cooler that will need to be
removed (shown below with EGR system removed). Ensure no other harnesses or clips are still con-
nected to EGR system and remove the EGR system from vehicle.