FASS T D07 260G - Manual (Page 3)

Serial #
¡WARNINGs!
 Read all instructions before starting installation of this product!
 Installing the improper FASS Pump can cause severe engine damage.
 Secure vehicle from ROLLING!
 Cab and Chassis may require modifications
 Consult vehicle’s manufacturers’ instructions concerning the electrical system before at-
tempting any electrical connections.
 Be sure that the serial # on this installation manual matches that of the outside of the box.
 Flush and clean all brass fittings and fuel line from debris
 Keep debris from entering the internals of the system during installation. Getting debris in
the water separator nipple can lock up the motor. If the motor does lock up from debris call
FASS for technical assistance.
 Wear safety glasses when operating power tools such as drills and grinders or when using a
punch or chisel.
 Properly secure lines to prevent chaffing.
FASS Recommended Application
T D07 220G Cummins 2005-2012 with super extreme horsepower modifications
T D07 260G Cummins 2005-2012 with super extreme horsepower modifications
Note: This kit may also be used on 1998.5-2004 Cummins with in-tank lift pump
modifications