FASS T D07 260G User Manual
Page 17
Blow out any open lines/cover any open ports
Bolts and fasteners properly tightened?
Electrical harness and fuel lines secured and properly tightened? Reconnect the battery.
Has the system been primed?
1. Turn key to the ignition position, turning on the FASS pump for 15 sec..
2. Crank engine and allow to run for at least 1 minute.
Check for leaks.
Start the engine
Recheck all fluid and filter connections for leaks
This pump comes with a 1 Year Manufacturer’s Warranty based on the date it has been manufactured.
To receive your extended Lifetime Warranty, you have 30 days from date of purchase to send the com-
pleted warranty information along with a copy of the purchase receipt in to Diesel Performance Prod-
ucts, Inc. Att: Warranty 16240 Hwy O Suite B Marthasville, MO 63357
F.
Cut fuel line and insert PL-1005 fitting using oil. Attach to DIPF-1003 fitting on the injection pump.
Torque to 18 lb./ft.²
Note: Secure all fuel lines with cable ties. Cable ties are an economical way to prevent the
possibility of problems occurring!
NOTE: Photo shows the common rail system on the 2007.5 through 2012 trucks.
The factory suction line can be capped off or removed from the truck. Make sure to drain factory fil-
ter. The openings on the filter and tank will need to be capped off to keep debris from getting into
lines or canister.