Programming the faceplate timer, Step 1. set time of day – EcoPure MW_MW30_450224 User Manual

Page 17

Miracle Water Installation & Operation Manual

Programming the Faceplate Timer

Figure 12

If you have questions about installation, programming, operating and routine maintenance...

call 1-800-356-7851

When the transformer is plugged into the electrical outlet, a model code and a test number (example:

s3.0), begins to flash in the faceplate display. Then, 12:00 AM and PRESENT TIME begins to flash.

NOTE:

If SR --or ----shows in the display, press the

or DOWN . button until LE31 shows.

Then, press the SELECT/MENU button to set, and change to the flashing PRE-
SENT TIME display.

Step 1. Set Time of Day

If the words PRESENT TIME do not show in the display, press the (Select/Menu) button
until they do.

1. Press the UP

or DOWN . buttons to set the present time. Up moves the display ahead; down

moves the time backward.

Be sure AM or PM, is correct.

NOTE:

Press buttons and quickly release to slowly advance the display. Hold for fast advance. This
procedure applies for all following settings.

SELECT