Drucker Diagnostics Model 842VES Centrifuge - Manual (Page 3)

WARNING: For the safety of both the operator and service personnel,
care should be taken when handling substances that are known to be toxic,
radioactive or contaminated with pathogenic microorganisms when using
this centrifuge. When Risk Group II materials are used (as identified in the
World Health Organization “Laboratory Bio-Safety Manual”), a Bio-Seal should
be employed. The rotor and rotor accessories should not be considered as
Bio-Seals. More than one level of protection must be provided in the case of
materials of a higher group. The use of flammable or explosive materials as
well as those materials which chemically react vigorously is prohibited.
Model Description
The Horizon Model 842VES is a continuous-duty, digitally-controlled centrifuge
designed for the separation of fluid samples. The 842VES offers control over almost
every aspect of the unit’s operation from variable acceleration and deceleration to
easy time and speed input. High speed and force capability produces platelet-poor/
free plasma and greatly reduce processing times. The exclusive Drucker horizontal
rotor allows for quick and easy sample loading and complete horizontal separation.
Save settings in one of 10 memory locations and recall them at the touch of a
button.
Intended Use
General purpose laboratory centrifuge for sample
seperation.
Supplied Accessories (Standard)
One (1) 6-Place
Horizontal Rotor
p/n 7786021
Also included (not shown):
• One (1) 10’ Line Cord • One (1) Operator’s Manual • 5/32” Allen Wrench
Six (6)
100mm Tube Holders
p/n 7713040
Six (6)
75mm Tube Holders
p/n 7713043
WARRANTY:
The Drucker Company warranties that this centrifuge is free from
defects in workmanship and parts for 2 years.
Made in the USA by
See the next
page for a
description of
optional
accessories.
page 3
200 Shadylane Drive • Philipsburg, PA 16866
Phone: 814-342-6205 or 814-692-7661 • Fax: 814-692-7662 • www.druckercompany.com