Dogtra RRD User Manual
Page 16
HOW TO CHARGE THE TRANSMITTER
AND RECEIVER :
1) Turn off the power to the receiver.
2) Plug the battery charger into a 110-volt
wall outlet.
3) Attach the double cable end of the battery
charging cables to the battery charging
receptacles on the transmitter and receiver.
(When charging the transmitter or receiver
separately, there is no need to use the battery
charging cables, just connect the battery
charger lead directly to the transmitter or
receiver).
4) Attach the other end of the battery charging
cables to the battery charger cord.The
indicator lights will turn on and glow red
when the battery is charging. They remain on
even when the battery is fully charged.
5) Charge the batteries for 14 hours.
6) After charging, disconnect the battery
charging cables from the battery charging
receptacles and fully seat the rubber covers
into the receptacles so that dirt will not enter
them.
7) Turn on the receiver's power switch and press
the transmitter launcher button to make sure
the indicator lights turn on, indicating that
the batteries are now charged.