Button functions – Dogtra 7000M Series User Manual
Page 9
14
BUTTON FUNCTIONS
The transmitter for the
single dog unit has four buttons (one on the
face of the transmitter, two on the left side and
one on the right side).
BUTTON FUNCTIONS
Nick
Pager
ON/OFF
Switch
(Mode Button)
Constant
(1-dog)
“Nick” Button
The “Nick” button is located on the top left.
It is imprinted with the letter “N” for an easy,
clear selection. When the “Nick” button is
pushed the receiver emits a single pulse of
electrical stimulation.
15
BUTTON FUNCTIONS
“Constant” Button
The “Constant” button is located on the
bottom left. Pressing the “Constant” button gives
continuous stimulation as long as the button is
pushed, for up to 12 seconds. If the button is not
released after 12 seconds, the stimulation will
automatically turn off as a safety feature. The
collar will be ready to be reactivated once the
button has been released.
“Pager” Button
The “Pager” button is located on the face of
the transmitter. Pressing it will give non-
stimulating vibration as long as the button is
depressed, for up to 12 seconds.