Dogtra 7000M Series - Manual (Page 7)

10
DESCRIPTION OF TRANSMITTER PARTS
LCD Screen
The LCD screen indicates the stimulation
level (0-127).
The LCD battery life indicator shows 3 bars
at full charge, 2 bars at medium charge and 1 bar
when it needs to be charged. The battery life
indicator only specifies the remaining charge for
your transmitter. To find the remaining charge
for your receiver, observe the LED screen on the
collar/receiver.
Green = full charge
Amber = medium charge
Red = needs charge
11
DESCRIPTION OF TRANSMITTER PARTS
Care for LCD Transmitters in Cold
Temperature
In cold temperatures (10 degrees F or
below), the Liquid Crystal Display (LCD) on
your transmitter may be dim or slow to respond.
Wait until the display becomes visible before
selecting any training level.
Even though the LCD screen might be dim or
slow to respond when you push the Nick or
Constant button, the transmitter will still function
properly. In the occurrence of extremely cold
weather, the LCD screen might take a moment to
respond causing the intensity level to freeze at
that current level. In this situation, if you turn the
rheostat intensity dial, the level on the screen
may not change but the actual intensity from the
coller/receiver will change in agreement with the
dial.
In this situation, it is ideal to either wait until
your transmitter is back to working order before
emitting a correction, or while holding the
constant button down slowly turn the Rheostat
Intensity Dial while watching your dog’s
reaction. Do not turn the Rheostat Intensity Dial
at a rapid increase because the collar/receiver
will emit a static correction based on the level of
the Rheostat Intensity Dial, which might not be
correctly reflected on the LCD screen.