Charging the batteries – Dogtra 7000M Series User Manual

Page 17

Battery Charging Procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on
page 30.

2. Plug the charger into a 120-volt wall outlet

or, if using the accessory field charger, plug
into a cigarette lighter. (Use a 230-volt
European charger for Europe.) When
properly plugged in, all indicator lights
should glow red.
The receiver automatically turns off when
you insert the charging cable into the battery-
charging receptacle on the receiver.

CHARGING THE BATTERIES

Recharge the unit if :

The LED indicator light on the collar receiver
is emitting a red color.

If the 3 bar indicator on the transmitter LCD
shows just 1 bar.

The indicator light on the transmitter or
receiver will not come on.

The indicator light on the transmitter or
receiver comes on momentarily, but will not
stay on when the “Constant” button is pushed.

uses Ni-MH

(Nickel-Metal-Hydride) batteries.

1. Charge the unit before using the unit for the

first time.

2. Do not charge the batteries near any

flammable substances.

3. Fully charge the batteries for 10 hours if the

unit is to be stored without use for a period
of 3 months or more.

CHARGING THE BATTERIES