beautypg.com

Button functions, 13 button functions button functions – Dogtra SureStim M Plus User Manual

Page 8

background image

“Nick” & “Constant” Toggle Switch

Located on the front of the transmitter is the “Nick”
& “Constant” toggle switch. The color-coordinated
buttons will operate the corresponding
receiver/collar of the same color (orange button for
the orange receiver/collar, and the gray button for
the black receiver/collar).

13

BUTTON FUNCTIONS

BUTTON FUNCTIONS

The

is expandable to

a 2-dog system. There are two buttons and a toggle
switch on the front of the transmitter, two buttons
on the left side of the transmitter, and one button on
the right side of the transmitter.

Nick/Cont.
Toggle Switch

1

st

-dog

Pager
(Gray Button)

2

nd

-dog

Pager
(Orange Button)

ON/OFF Switch

(Mode Button)

1

st

-dog

Nick & Constant

(Gray Button)

2

nd

-dog

Nick & Constant

(Orange Button)

12

When the toggle switch is set to “Nick”, and the button
is pressed, the transmitter will send a single

second

stimulation. When the toggle switch is set to
“Constant”, the transmitter will send a continuous
stimulation while the button is pressed for up to 12
seconds.

The “Constant” stimulation will only activate for a
maximum of 12 seconds. After 12 seconds of
continuous stimulation, the stimulation will reset. The
stimulation reactivates once the button is released and
pressed again.

“Pager” Button

The “Pager” buttons are located on the front of the
transmitter. The orange button corresponds with the
orange receiver/collar and the gray buttons with the
black receiver/collar. Pressing it will give a non-
stimulating vibration for as long as the button is
pressed, for up to 12 seconds.

BUTTON FUNCTIONS

This manual is related to the following products: