Dogtra 1800 Series - Manual (Page 15)

26
TESTING
27
OPERATING
Fitting the Collar
The collar strap should be adjusted so that
the contact points are held firmly against the
dog’s skin. If the collar is too loose, irritation
may result from the contact points rubbing
against the skin.
If the dog has a heavy coat, move the
receiver up and down to work the contact points
down into the coat.
ATTENTION!
Avoid having the dog wear the collar with
the contact points in the same place for more
than 8 hours at a time. Leaving the points on
the same spot for extended periods of time
can cause skin irritation. If the dog is to wear
the e-collar for long periods, occasionally
reposition the collar so that the contact points
are moved to a different spot on the dog’s
neck.
OPERATING INSTRUCTIONS 2. Watch the test light as you push the “Nick”
button on the transmitter. It should light for
just a moment.
3. Watch the test light as you push the
“Constant” button on the transmitter. It should
glow brightly. As a safety feature, the collar
receiver will automatically shut off stimulation
if the constant button is depressed for twelve
seconds or longer.
4. Change the intensity dial on the transmitter
clockwise and then counterclockwise. The test
light should glow brighter with higher levels of
stimulation and dimmer with lower levels.