Colorlight CLIR - Manual (Page 8)

Page 8
CL IR
MANUAL
3. USING THE THERMAL CAMERA IN CAM MODE
3.1 Activate the thermal camera
Note:
● Make sure your monitor is powered on before activating the camera.
● Activation takes a few seconds, don’t press any cam-buttons until the image is visible in
the monitor.
● Changes in CAM mode takes effect immediately and does not require confirmation.
● Camera settings can only be accessed if camera is activated.
● Activation must be done from the CAM-mode screen.
● Activated camera is indicated by the letter “C” in the bottom left of the display.
To activate the camera, first select "Surveillance ” from the quick start menu.
In “Surveillance” submenu, select "CAM mode”.