Compaq TFT5000 - Manual (Page 17)

English 1-15
Part Number: 325703-001- Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 03/15/99 4:03 PM
File Path: P:\Docs\Monitors\Aoki
Display Resolutions
The display resolutions listed below are the most commonly used
modes and are set as factory defaults. This monitor automatically
recognizes these preset modes and they will appear properly sized and
centered on the screen.
Display Resolutions
Preset Modes Resolutions
1. Industry Standard 640 × 350 at 31.5 kHz/70 Hz
2. Industry Standard 640 × 480 at 31.5 kHz/60 Hz
3. VESA 640 × 480 at 37.5 kHz/75 Hz
4. VESA 640 × 480 at 43.3 kHz/85 Hz
5. Industry Standard 720 × 400 at 31.5 kHz/70 Hz
6. VESA 800 × 600 at 37.9 kHz/60 Hz
7. VESA 800 × 600 at 46.9 kHz/75 Hz
8. VESA 800 × 600 at 53.7 kHz/85 Hz
9. Macintosh-compatible 832 × 624 at 49.7 kHz/75 Hz
10. VESA 1024 × 768 at 48.4 kHz/60 Hz
11. VESA 1024 × 768 at 56.5 kHz/70 Hz
12. VESA 1024 × 768 at 60 kHz/75 Hz
User Modes
The video controller signal may occasionally call for a mode that is
not preset if:
You are not using a Compaq standard graphics adapter.
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the monitor
screen by using the on-screen display. User changes can be made to
any or all of these modes and saved in memory. The monitor
automatically stores the new setting, then recognizes the new mode
just as it does a preset mode. In addition to the 12 factory preset
modes, there are four user modes that can be entered and stored.