Motorola SURFboard SBG901 - Manual (Page 18)

B
2 • Getting Started 17
Determine which connection types you will make to the SBG901. Check that you have
the required cables, adapters, and adapter software. You may need:
Item Description
Wireless LAN Wireless adapter and driver software for each computer having a wireless
connection
Wired Ethernet Ethernet cables and network interface cards (NICs) with accompanying
installation software
LAN To connect more than one computer via an Ethernet connection to the
SBG901
Precautions
Postpone SBG901 installation until there is no risk of thunderstorm or lightning activity in
the area.
To avoid potential shock, always unplug the power cord from the wall outlet or other
power source before disconnecting it from the SBG901 rear panel.
To prevent overheating the SBG901, do not block the ventilation holes on the sides of
the unit. Do not open the unit. Refer all service to your Internet Service provider.
Signing Up for Service
You must sign up with an Internet Service provider to access the Internet and other
online services. To activate your service, call your local Internet Service provider.
You will need to provide the MAC address marked HFC MAC ID printed on the MAC
Label . You can record it on the SBG901 Install Sheet.
You should ask your Internet Service provider the following questions:
•
Do I have any special system requirements?
•
When can I begin to use my SBG901?
•
Are there any files I need to download after connecting the SBG901?
•
Do I need a user name or password to access the Internet or use e-mail?
System Requirements
You can connect Microsoft ® Windows ® , Macintosh ® , UNIX ® , or Linux ® computers to the
SBG901 LAN using one of the following connections:
•
Ethernet — 10Base-T or 10/100Base-T Ethernet adapter with proper driver software
installed.
•
Wireless — Any IEEE 802.11g or IEEE 802.11b device. This includes any Wi-Fi
certified wireless device, such as a cellular telephone equipped with this feature.