Cooper Instruments & Systems TT03C Digital Cap Torque Gage - Manual (Page 19)

Series TT03 Digital Torque Gauges User’s Guide
18
11.5 Initial Mode
This section is used to configure the initial mode upon powering on the gauge. To access this parameter,
select Initial Mode from the menu. The screen will display the available modes. An example is as follows:
The default value is Real Time.
11.6 Information / Welcome Screen
The following screen is displayed at power up and can be accessed at any time by selecting Information
from the menu:
12 SPECIFICATIONS
12.1 General
Accuracy: ±0.5% of full scale
Sampling rate: 2,000 Hz
Power: AC or rechargeable battery. Low battery indicator appears when battery level is low, and
gauge powers off automatically when power reaches critical stage.
Battery life:
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units: lbFin, ozFin, kgFmm, Ncm (depending on model)
USB output: Individual data point output by pressing DATA button. Configurable up to 115,200 baud.
Configurable
settings:
Digital filters, USB output, set points, automatic shutoff, default units, default mode, key
tones, audio alarms, calibration
Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
Weight: 1.8 lb [0.8 kg]
Included accessories:
Carrying case, AC adapter, battery, USB cable, resource CD (USB driver, MESUR
TM
Lite software, MESUR
TM
gauge DEMO software, and user’s guide), NIST-traceable
certificate of calibration
Warranty: 3 years (see individual statement for further details)
Digital Torque Gauge
Series TT03
Model No: MTT03-50
Serial No: 1234567
Version: 1.0
(c) Mark-10 Corp.
INITIAL MODE
* Real Time
Peak Clockwise
Peak Counter-clockwise