BlueAnt X3 Micro Bluetooth Headset - Manual (Page 8)

Using your headset
3. Short press the MFB on your headset. It may take a while to set up the Bluetooth
connection if the Bluetooth connection is down.
4. After you hear a beep, say the name of the contact you want to call.
5. To cancel the voice dialing or end the call, short press the MFB button.
Note:
Using your headset to record the voice tags can enhance the recognition rate. Please refer to
the user guide of your phone. Noisy environments can affect voice recognition. Record your voce
commands in a quiet environment.
To answer a call
1. When your headset rings or t h e LED indicates you have an incoming call (please refer to
the LED indicator chart), short press the MFB
to answer the call.
13
14
Note:
If your phone rings first, wait until your headset rings, then short press the MFB. Your phone
takes time to set up the Bluetooth connection if the Bluetooth connection is down.
2. End the call by short pressing the MFB .
To redial the last call
1. Make sure your phone supports Handsfree profile.
2. When your headset is in standby mode, long press the Volume down button until you hear a long beep.
3. To cancel last call redial or end the call, short press the MFB .
To make a call using the phones keypad.
1. Short press the MFB
to connect to the headset. You may need to cancel voice dial if it is activated.
Short press the MFB once to do this.
2. Use the keypad on your phone to dial as usual. Audio will be heard on the headset.