BlueAnt X3 Micro Bluetooth Headset - Manual (Page 4)

Getting started
Getting started
Before you can use your headset, you must do the following two things:
1. Charge your headset battery for 4 hours using only the charger provided.
2. Pair your headset with a Bluetooth enabled device, for example, a mobile phone.
Charging
Your headset comes with a built-in rechargeable battery. For the first time use, you need to charge
for 4 hours. During charging, the indicator shows a steady red light. When the battery is fully
charged, the red light will turn off. It takes 90-120 minutes to fully charge the battery. Do not charge
your headset for more than 1 day. The more you talk using your headset, the less standby time
your battery has for that charge. Your headset will require longer charging times when not used
over extended periods of time.
05
06
IMPORTANT NOTE:
It is recommended to charge the battery only when it
goes flat. This will ensure the battery life is
preserved. Of course this is not always possible, but
running down the battery until you get the low
battery LED lights is advised every so often.