ClearSounds TALK500 V508 - Manual (Page 17)

16 – ENGLISH 17 – ENGLISH
Copy From The Caller ID To The phonebook
You can copy Caller ID information to the phone book while you are
reviewing the Caller ID information.
1. Select the required Caller ID memory location by pressing or .
2. press and hold MENU button for two seconds, display will show
CopY To MEMoRY.
3. press DIAL button, display will show SAVED!.
TRoUBLESHooTING GUIDE
No dial tone
1. Check that all phone cord connections (including the curly cord)
and AC Adapter are securely plugged into the telephone & wall
jack.
2. Check that the phone is in the correct dialing mode, Touch-Tone /
pulse Setting.
3. plug another phone into the jack to make sure your phone service
is functioning properly.
Call will not dial or dials very slowly
1. Check that the phone is in the correct dialing mode, Touch-Tone /
pulse Setting
No audible ringer
1. You may have too many extensions on your line. Try unplugging
a few devices. Having too many telephones /accessories can also
create problems such as low ringer volume or impaired quality
during calls.
No amplification
1. Check to see if the +40dB amplify button is “oN”. The red light
should be lit.
2. Check the AC power Adapter and make sure it is plugged into the
wall and into the appropriate jack on the phone.
Noise, Static, Interference while using the handset
1. A filter may be required for homes with DSL line or near Radio towers.
There is a red light that continues to flash
1. You have un-reviewed Caller ID / Call Waiting information or
missed a call.
Talk500-TriLingual.indd 17 5/8/08 12:09:23 PM