Bio-Rad Model 2110 Fraction Collector - Manual (Page 10)

Feature Function
Carousel Holds the collection tubes. The tube positions are
numbered 1-80 on the flange of the carousel, and
line up with the center of each tube. The carousel
is designed so that any liquid spilled in it will
flow to the center and out the rear of the base. The
carousel may also be used for storage of test
tubes.
Drop former Seals against the inlet tubing ( 1 ¼
16
" or 1 ¼
8
" OD) to
form uniform size drops.
Arm cap Holds the drop former in place.
Drive gear Engages the carousel and advances it.
Drive seal Protects the electric drive from direct spills.
Waste line Collects drainage or spills and directs it to waste.
See Section 5.5 for connection.
Inlet tubing Inlet tubing (not included) can be any rigid or
flexible tubing with
1 ¼
16
" or 1 ¼
8
" OD, usually
coming directly from a detector.
6
M7318120G.qxd 10/21/2002 2:48 PM Page 6