Bio-Rad Trans-Blot® SD Semi-Dry Transfer Cell - Manual (Page 2)

Note
To insure the best performance from the Trans-Blot SD semi-dry electrophoretic transfer
cell, become fully acquainted with these operating instructions before using the cell to
transfer samples. Bio-Rad recommends that you first read these instructions carefully. Then
assemble and disassemble the cell completely without transferring sample. After these
preliminary steps, you should be ready to transfer a sample.
Bio-Rad also recommends that all Trans-Blot SD cell components and accessories be
cleaned with a suitable laboratory cleaner (such as Bio-Rad Cleaning Concentrate, catalog
number 161-0722) and rinsed thoroughly with distilled water, before use.
Warranty
Bio-Rad Laboratories warrants the Trans-Blot SD semi-dry electrophoretic transfer cell
against defects in materials and workmanship for 1 year. If any defects occur in the instrument
during this warranty period, Bio-Rad Laboratories will repair or replace the defective parts free.
The following defects, however, are specifically excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an authorized
agent.
3. Use of fittings or other spare parts supplied by anyone other than Bio-Rad Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster.
6. Corrosion due to use of improper solvent or sample.
This warranty does not apply to parts listed below:
1. Platinum plate electrode.
For any inquiry or request for repair service, contact Bio-Rad Laboratories after con-
firming the model and serial number of your instrument.
Model___________________________________
Catalog Number__________________________
Date of Delivery___________________________
Warranty Period__________________________
Serial Number____________________________
Invoice Number___________________________
Purchase Order Number____________________