Baseline Systems BaseStation 6000 User Manual
Page 10
10
Step Four: Adjust the Zone Run Time
1. On the Main Page, click the Adjust Zone tab
(1)
.
2. Under the Sprinkler Settings column, set the total minutes on
(2)
for each zone. For more information
about this setting, see the note on Intelligent Soak Cycles at the end of this document.
Note: The Soak Cycle settings
(3)
are set to default values. While you can change those values, we
recommend, at least initially, that you use the default soak cycle values.
3. Click Run
(4)
to start the system.
Congratulations!
You are now ready to water.
Baseline Inc.
Phone: 866.294.5847 · Fax: 208.323.1834 · www.baselinesystems.com