B&G V90 VHF Radio - Manual (Page 23)

| 23
Installation | V90 Installation Manual
Connector 1 - Fuse
Install a 10 Amp MINI
® blade fuse.
Connector 2 - Power connection
Number Label Wire color
1 VCC Red
2 GND Black
¼ Notes:
•
Voltage: 12 VDC (10.8 VDC to 15.6 VDC)
• 2 m twin-core power cable is supplied
• Ground must be connected to the vessel’s common ground,
which must be negative.
Connectors 3, 4, 5 and 6 - Wired handsets
Number Label Wire color
1 GND Black
2 TX/RX_A Blue
3 TX/RX_B Green
4 VCC Red
5 POWER-SW White
6 PTT Grey
7 MIC_AF- Yellow
8 MIC_AF+ Orange
¼ Note: All the necessary wires are included in the handset cable
supplied.