B&G Triton Display - Manual (Page 16)

14 |
Troubleshooting | IS40/Triton System Installation Manual
Troubleshooting
Issue Solution
Unit does not power
up • Check that the NMEA 2000/SimNet
network has 12 V connected.
• Try connecting to a different network
cable in case power wires damaged
internally.
Unit does not show
data for a specific
source • In the advanced setup menu, select
sources, and manually select the
required data source.
• Check the network connection on the
data source.
Unit does not show
any data from any
connected source
or
Unit data sources
intermittently drop
out. • In the advanced setup menu, select
sources option, then select AUTO
SELECT.
• Check the Device List menu and see if
any devices are detected.
• Try connecting to a different network
cable in case data wires damaged
internally.
• In the advanced setup menu, check
the diagnostics page to see if any
errors are occurring.
• Check network topology and
termination rules are correctly
implemented.
• Disconnect other devices from
network, one-by-one, starting with
3rd party devices.