Apricorn EZ Writer LS - Dual Layer DVD Burner - Manual (Page 8)

The Leader in Personal Storage
8
Hardware Installation
Note: Depending on the host computer EZ Writer’s low power
design will receive sufficient power to operate through
the USB cable alone. Should you need additional power an
AC Adapter has been included. Only use the AC Adapter
provided by Apricorn, using an incorrect AC Adapter can
result in permanent damage to the drive.
1. Insert the plug of the USB cable into the Interface Connector of the
drive. Press firmly until the cable is seated correctly.
2. Place the external drive in the horizontal position. The drive is designed
to operate only in the horizontal position. Operating the external drive
in any abnormal position is not recommended.
3. If additional power is needed, connect the AC Adapter lead to the Power
Jack (DC IN) at the rear panel of the drive. And then attach the AC
Adapter to the AC power outlet.
4. Insert the port connector of the USB cable into the USB port of your
computer and your EZ Writer drive is now ready for use.
Port connector of the USB Cable USB Port of computer