Amico TTS Vertical Flat Wall - Manual (Page 12)

12 Amico Beds
Place the Vacuum Canister in the Vacuum
Canister Holder (supplied by Amico). Take
the Canister and align it with the vacuum
slide and slide the canister into the
vacuum slide. If the Canister is aligned
correctly with the vacuum slide, the
Canister holder shall slide right into the
vacuum slide and fit in securely.
Place the oxygen Flowmeter, Medical Air
Flowmeter and Vacuum Regulator onto
the corresponding outlets. The Amico
Secondary Products are gas-specific.
In order to remove the oxygen Flowmeter,
medical air Flowmeter and vacuum regulator,
simply turn the Ohmeda adaptor clockwise
and when loose, proceed to gently tug off
the Teaching Solution.
Ohmeda Adaptor
5.
6.