Crown Audio CTs 600 - Manual (Page 17)

page 17
CTs 2-Channel Power Amplifiers
Operation Manual
Detent 26 dB Tolerance (dB) 4/8 ohm or 70/100V
0 (full CW) 0.0 ±1 0.0
1 0.5 ±1 0.5
2 1.0 ±1 1.5
3 2.0 ±1 3.5
4 3.0 ±1 5.0
5 4.0 ±1 6.5
6 5.0 ±1 8.0
7 6.0 ±1 9.5
8 7.0 ±1.5 11.0
9 8.0 ±1.5 13.0
10 9.0 ±1.5 14.5
11 10.5 ±1.5 16.0
12 12.0 ±1.5 18.0
13 13.5 ±3 20.0
14 15.0 ±3 22.0
15 18.0 ±3 24.0
16 21.0 ±3 26.0
17 24.0 ±3 30.0
18 36.0 ±6 42.0
19 48.0 ±6 54.0
20 (full CCW) OFF OFF OFF
5 Advanced Features
and Options
5.3.1 Nominal Attenuation Settings
The signal level for each input can be attenuated accurately by
adjusting the 21-step Level Control (see Section 4.3). Figure 5.5
shows the attenuation in dB for each detent. The setting of the
input-sensitivity switch varies the actual attenation as shown.
The accuracy of the attenuation varies with the setting: see
Tolerance (dB).
Figure 5.5 Attenuation vs. Detent of Level Controls for CTs 2-Channel Amplifiers