Sensus (socam/meinecke) – ADS Environmental Services PrimeLog QR 775015 A0 User Manual
Page 28

ADS PrimeLog User Manual
24
Sensus (Socam/Meinecke)
Meter
K510
K505R
(mm)
FCAL
510/510PR
1
501L
10
501LM
100
501JM
15-20
1000
0.5
510/510PR
10
501JM
25-30
100
5
R01.1
OPTO 06
50-125
100/1000
1
150-250
1000/10000
10
Cosmosil
300-800
10000/100000
100
RD 01
OD 07
Cosmos
50-125
100
100/1000
40-125
10/1000
1
1000/10000
WP/WS-Dynamic
150-300
100/10000
10
Supplementary Notes for Meter Scaling Tables:
FCAL = NO. LITERS PER PULSE
Kent Meters:
* Some earlier 100mm meters require the following:
FCAL = 100(PU10/LRP) or 10(PU100/HRP). These meters can be distinguished by the center pointer dial
registration = 1000 liters/rev.
** Applies to 7-digit counters only; the other FCALs apply to the 8-digit counters.
Kent combination meters use a Helix 3000 meter as the main meter and a PSM-T as the secondary meter.
Select the appropriate FCAL from the table above for each of the meters.
The Master 2000 has been discontinued.
Socam meters:
*The 510 pulse unit is factory-installed and cannot be removed. The FCAL is determined at the factory and
the table above shows the values available. Check the individual meter before selecting the appropriate
FCAL.