Great Plains John Kinze Planter Seed-Lok - Manual (Page 9)

4/13/2009 206-013M
7 Operating and Assembly Instructions
Seed-Lok™ Mounting Instructions
for Kinze and JD 7000 Planters
Consult page 10, Parts Section,
for all part (#) references:
1. Lower planter to ground.
2. Remove gauge wheels and scrapers, see Figure 5.
Take note of spacers located on the spindles to en-
sure the wheel is correctly remounted.
3. Insert Seed-Lok™ mount (#3) from the bottom side
of the opener body and align the holes of the mount
with those of the channel, see Figure 6.
4. Secure the Seed-Lok™ mount by screwing the bolts
and washers (#1), and (#2) through the opener body
and into the flanged nuts (#4).
5. Place the Seed-Lok™ assembly (#11) on the bot-
tom side of the Seed-Lok™ mount (#3) & insert the
1 1/4 carriage bolts & flanged nuts (#21), and (#20)
see Figure 8.
6. Follow the instructions in " Adjustments", on Page 9,
to initially set your Seed-Lok™ Wheels.
7. Reinstall gauge wheels.
Note: If scraper use is still desired place them be-
tween the washer and formed channel before tight-
ening bolts, see Figure 7.
13263
Figure 5 Figure 7
Figure 6 Figure 8