Great Plains 2N-3020 Parts Manual - Manual (Page 75)

Revision Comments Part Description Part No. Ref.
Image No. dwg11713
2nd rev. Includes items 1 through 10 JAW CLUTCH CCW EXTENDED 176-041S
Use existing stock; 1st rev. Includes items 1 through 10 RPBY 176-041S & 176-045S 176-039S
2nd rev. SNAP RING EXT 1 1/4 HEAVY 800-177C 1.
Use existing stock; 1st rev. SNAP RING EXT INVERTED 1-1/4 800-077C 1.
CLUTCH FRICTION WASHER 176-065D 2.
BSHG FLG 1.26IDX1.41ODX.87L 817-111C 3.
2nd rev. CLUTCH DRIVE PLATE LONG - CCW 176-079D 4.
Use existing stock; 1st rev. RPBY 176-079D & 176-082D 176-062D 4.
2nd rev. CLUTCJ ARM PLATE 176-080D 5.
Use existing stock; 1st rev. RPBY 176-080D 176-063D 5.
2nd rev. CLUTCH SLIDE PLATE - CCW 176-077D 6.
Use existing stock; 1st rev. RPBY 176-077D 176-060D 6.
3rd rev. CLUTCH HUB 1 BORE 176-083D 7.
Use existing stock; 2nd rev. RPBY 176-083D 176-073D 7.
Use existing stock; 1st rev. RPBY 176-073D 176-064D 7.
SPRING COMP 2 1/16 OD X 4 LG 807-097C 8.
CLUTCH SPRING RETAINER 176-066D 9.
2nd rev. PIN ROLL 3/16X 1 1/2 PLT 805-024C 10.
Use existing stock; 1st rev. RPBY 805-024C 805-172C 10.
GREASE ZERK 1/4-28 X 45-DEG 800-058C 11.
04/09/13 - 75 - 196-164P
Table of Contents Part Number Index
Drive
Jaw Clutch With Zerks
(Applies to 2N-2420 (1995+), 2N-3020 (1995+) only)