Great Plains 2N-3020 Parts Manual - Manual (Page 17)

Revision Comments Part Description Part No. Ref.
Image No. dwg14457
Refer to "Drill Raise-To-Fold Midway
Hydraulic Cylinder 30' (810-215C)"
for breakdown.
CYL 4.5X16X1.5 ROD (TIE ROD) 810-215C 1.
Refer to "Drill Raise-To-Fold Midway
Hydraulic Cylinder 24' (810-216C)"
for breakdown.
CYL 4X16X1.5 ROD (TIE ROD) 810-216C 1.
BUSHING CYL 1 1/4 X 1 X 1 890-005C 2.
TRANSPORT LIFT WELDMENT 196-128H 3.
WASHER FLAT 3/4 SAE PLT 804-025C 4.
HHCS 3/4-10X2 1/2 GR5 802-212C 5.
Rev. 3 For 3020 drills. (S/N D2107, D2109
and D2110+) Refer to "Drill Transport
Axle Midway Hydraulic Cylinder 30'
(890-393C)" for breakdown.
HYD CYL REP 4 1/2 X 12 X 2 ROD 810-393C 6.
Rev. 3 For 2420 drills. (S/N C1824+) Refer to
"Drill Transport Axle Midway
Hydraulic Cylinder 24' (810-392C)"
for breakdown.
HYD CYL 4 1/4 X 12 X 2 ROD 810-392C 6.
Rev. 2 Refer to "Drill Transport Axle Midway
Hydraulic Cylinder 24' (810-221C)"
for breakdown.
CYL REP 4.25X12X1.5 ROD (TIE) 810-221C 6.
Refer to "Drill Transport Axle Midway
Hydraulic Cylinder 30' (810-218C)"
for breakdown.
CYL REP 4.5X12X1.5 ROD (TIE) 810-218C 6.
PIN CLEVIS 1 X 3 5/16 HRD PLT 805-239C 7.
PIN COTTER 3/16 X 1 3/4 PLT 805-017C 8.
Rev. 3 Used with 196-199H. S/N C1693+ on
24' Drills and S/N D1905+ on 30'
Drills
TRANSPORT AXLE CYLINDER LUG 196-414D 9.
Rev. 2 Used with 196-129H. S/N C1692- 24'
Drills and S/N D1904- 30' Drills
AXLE LUG 196-292D 9.
BUSHING SPINDLE 1 1/2X1 1/4X1 890-011C 10.
Rev. 2 is not interchangeable
w/rev. 1
S/NC1693+ on 24' Drills and S/N
D1905+ on 30' Drills
TRANSPORT AXLE WELDMENT 196-199H 11.
Rev. 1 S/N C1692- 24' Drills and S/N D1904-
30' Drills replaced by 196-199H and
two of 196-414D
RPBY 196-199H & 2 196-414D 196-129H 11.
FLEX LINK PIVOTPIN 1 1/4X2 7/8 181-038D 12.
Formerly 805-152C PIN 3/8 X 3 USABLE LW/PIN 805-001C 13.
GREASE ZERK STRAIGHT 1/4-28 800-001C 14.
WASHER FLAT 1 SAE 804-029C 15.
WASHER LOCK SPRING 1 PLT 804-027C 16.
NUT HEX 1-8 PLT 803-031C 17.
GREASE ZERK 1/4-28 X 45-DEG 800-058C 18.
HHCS 1-8X5 1/2 GR5 802-205C 19.
Includes items 14 & part number
196-145V
ROCKSHAFT BRG ASSY 196-146K 20.
Includes items 13; 15; 16; 17 & 19 ROCKSHAFT BRG SUB ASSY 196-145V 20.
WASHER LOCK SPRING 3/4 PLT 804-023C 21.
NUT HEX 3/4-10 PLT 803-027C 22.
2SNT AXLE TOP HALF BAND 196-248D 23.
NUT LOCK 1/4-20 PLT 803-007C 24.
HHCS 1/4-20X2 GR5 802-152C 25.
VINYL SEAL 3/8 X 1/2 (PER FT) 816-004C 26.
KNOB 3 PRONG 1/4-20 X 1/2 LG 817-192C 27.
HYDRAULIC VALVE COVER 196-357D 28.
CLIP U-TYPE NUT 1/4-20 SLF-RET 800-163C 29.
CYLINDER SPACER BUSHING 161-126D 30.
CYLINDER LOCK CHANNEL-1 1/2X12 196-177H 31.
04/09/13 - 17 - 196-164P
Table of Contents Part Number Index
Transport
Transport Lift And Axle
(Applies to 2N-2420 (1995+), 2N-3020 (1995+) only)