Great Plains 2N-3020 Parts Manual - Manual (Page 21)

Revision Comments Part Description Part No. Ref.
Image No. dwg12803
HHCS 3/4-10X5 GR5 802-069C 1.
2nd rev. (S/N C1733+ for 2N-2420; D1954+ for
2N-3020)
SPINDLE SGL 2.73X15.97 815-099C 2.
Use existing stock; 1st rev. (S/N C1732- for 2N-2420; D1953- for
2N-3020)
RPBY 815-099C 196-299D 2.
WASHER LOCK SPRING 3/4 PLT 804-023C 3.
NUT HEX 3/4-10 PLT 803-027C 4.
8-BOLT HUB SEAL 816-019C 5.
BRG CONE 2.00IDX1.18WD #3780 822-036C 6.
2nd rev. (S/N C1733+ for 2N-2420; D1954+ for
2N-3020); Includes items 8 through
11
HUB 8 BOLT 5790# W/CUPS&STUDS 815-101C 7.
Use existing stock; 1st rev. (S/N C1732- for 2N-2420; D1953- for
2N-3020); Includes items 8 through
11
8-BOLT HUB W/CUPS & STUDS 200-008S 7.
BRG CUP 3.67ODX.93WD #3720 822-037C 8.
HUB STUD 5/8-18X2 1/2 GR5 802-182C 9.
8-BOLT WHEEL HUB MACH. 200-006D 10.
BRG CUP 3.00ODX.75WD #2720 822-039C 11.
BRG CONE 1.31IDX1.01WD #2790 822-038C 12.
2nd rev. (S/N C1733+ for 2N-2420; D1954+ for
2N-3020)
7/8 SPINDLE WASHER, HARDENED 181-064D 13.
Use existing stock; 1st rev. (S/N C1732- for 2N-2420; D1953- for
2N-3020)
WASHER SPINDLE - 7/8 804-055C 13.
PIN COTTER 3/16 X 1 1/4 PLT 805-016C 14.
NUT HEX SLOTTED 7/8-14 PLT 803-029C 15.
REPLACED BY 890-032C P502001 16.
NUT LUG 5/8-18 X 90 DEG PLT 803-219C 17.
2nd rev. (S/N D2094+ for 3020, C1819+ for
2420); Includes items 19, 20 & 21
TITAN 12.5L-15 20 PLY 8 BOLT 196-208K 18.
1st rev. (S/N D2093- for 3020, C1818- for
2420)
RPBY 196-208K 196-157K 18.
2nd rev. TIRE TITAN 12.5L-15 20 PLY 814-177C 19.
1st rev. RPBY 814-177C 814-103C 19.
WHEEL 15 X 10 X 8 BOLT 814-104C 20.
VALVE STEM TR415X.625X1 1/4 LG 816-035C 21.
HUB & SPINDLE ASY 8 BOLT 5790# 815-103C 22.
Includes items 2; 13,14 &15 SPINDLE ASSY SGL 2.73X15.97 815-100C 22.
04/09/13 - 21 - 196-164P
Table of Contents Part Number Index
Transport
Transport Tire And Hub
(Applies to 2N-2420 (1995+), 2N-3020 (1995+) only)