Great Plains 2N-3010 Parts Manual - Manual (Page 23)

Revision Comments Part Description Part No. Ref.
Image No. dwg12804
HHCS 3/4-10X2 1/4 GR5 802-065C 1.
HHCS 5/16-18X3 1/2 GR5 802-333C 2.
RPBY 196-146D 196-112D 3.
HINGE HYDRAULIC HOSE MOUNT 196-301D 4.
NUT LOCK 5/16-18 PLT 803-011C 5.
VERTICAL SPINDLE WELDMENT 196-137H 6.
VERTICAL SPINDLE SPACER TB TOP 196-318D 7.
SEAL 4.25 ID X 6.000 X .500 816-175C 8.
BRG CONE 3.50ID 593 822-123C 9.
BRG CUP 6.00OD 592A 822-124C 10.
2nd Revision LH TOOLBAR WELDMENT 196-204H 11.
1st Revision Obsolete replaced by 196-204H RPBY 196-204H 196-140H 11.
2nd Revision RH TOOLBAR WELDMENT 196-205H 11.
1st Revision Obsolete replaced by 196-205H RH TOOL BAR WELDMENT 196-141H 11.
HHCS 5/16-18X1 1/4 GR5 802-010C 12.
WASHER LOCK SPRING 5/16 PLT 804-009C 13.
CYL 3.5X16X2 ROD (TIE ROD) 810-219C 14.
CYL 4X16X2 ROD (TIE ROD) 810-240C 14.
WASHER FLAT 1 SAE 804-029C 15.
NUT BRG LOCK, TAN-17 803-213C 16.
WASHER BRG LOCK, TW117 804-104C 17.
WASHER BRG TONGUED K91517 804-105C 18.
VERTICAL SPINDLE BTM MNT PLT 196-316D 19.
VERTICAL SPINDLE SPACER TB BTM 196-317D 20.
WASHER LOCK SPRING 3/4 PLT 804-023C 21.
NUT HEX 3/4-10 PLT 803-027C 22.
BUSHING CYL 1 1/4 X 1 X 1 890-005C 23.
BUSHING SPINDLE 1 1/2X1 1/4X1 890-011C 24.
01/31/14 - 23 - 196-126P Rev. A
Table of Contents Part Number Index
Transport
Toolbars
(Applies to 2N-2410 (1995+), 2N-3010 (1995+) only)