Great Plains 2N-3010 Parts Manual - Manual (Page 121)

Revision Comments Part Description Part No. Ref.
Image No. dwg12037
1st rev. See item 28. RPBY 817-328C 198-104D 1.
PIN ROLL 5/32 X 5/8 PLT 805-186C 2.
HFS 1/2-13X3 3/4 GR5 SPTHD 802-421C 3.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C 4.
(2N2410 S/N C1811-; 2N3010 S/N
D2082-) Use only with item 6.
PRESS WHEEL ARM BUMPER 817-132C 5.
1st rev. (2N2410 S/N C1811-; 2N3010 S/N
D2082-). See item 29.
RPBY 817-347C 812-194C 6.
SPRING .540 O.D.X 1 1/4 X.054W 807-106C 7.
PIN CLEVIS 3/8 X 2 1/8 USABLE 805-154C 8.
PRESS WHEEL PIVOT TUBE 198-137D 9.
PARALLEL ARM PIVOT BUSHING 817-084C 10.
PRESS WHEEL ARM MACHINED 199-025D 11.
SFHCS 1/2-13X1 W/ 3/8 SQ SOCKT 801-115C 12.
PRESS WHEEL ARM END WMNT 122-188H 13.
3 X 14 PRESS WHEEL SPACER 122-125D 14.
HHCS 5/8-11X4 GR5 802-060C 15.
WASHER LOCK SPRING 5/8 PLT 804-022C 16.
803-184 FLG TP LK 5/16-18ZNYCR 803-177C 17.
Includes items 26 & 27 3 X 14 TIRE & RING ASSEMBLY 122-198V 18.
LARGE SPACER TUBE 817-062C 19.
SMALL SPACER TUBE 122-110D 20.
BRG INS .63IDX1.57OD DBL LIP 822-095C 21.
4X12 PW RIM HALF 122-041D 22.
HHCS 5/16-18X2 3/4 GR5 802-197C 23.
Includes items 17 through 23 3 X 14 PEAKED P.W. ASSEMBLY 122-117S 24.
Includes items 2, 7, 8, 28 and 29. PW ADJUSTMENT TRUNNION ASSY 122-202S 25.
3 X 14 PEAKED PRESS WHEEL TIRE 814-067C 26.
3 X 14 RIM SPACER RING 817-063C 27.
2nd rev. T-HANDLE ASSEMBLY 817-328C 28.
2nd rev. (2N2410 S/N C1812+; 2N3010 S/N
D2083+)
OPENER TRUNION 817-347C 29.
01/31/14 - 121 - 196-126P Rev. A
Table of Contents Part Number Index
Press Wheels
3" x 14" Peaked Press Wheel (S/N C1657- 24' Drills And S/N D1838- 30' Drills)
(Applies to 2N-2410 (1995+), 2N-3010 (1995+) only)