Great Plains 2N-3010 Parts Manual - Manual (Page 133)

Revision Comments Part Description Part No. Ref.
Image No. dwg14795
1st rev. See item 26. RPBY 817-328C 198-104D 1.
PIN ROLL 5/32 X 5/8 PLT 805-186C 2.
HFS 1/2-13X3 3/4 GR5 SPTHD 802-421C 3.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C 4.
(2N2410 S/N C1811-; 2N3010 S/N
D2082-) Use only with item 6.
PRESS WHEEL ARM BUMPER 817-132C 5.
1st rev. (2N2410 S/N C1811-; 2N3010 S/N
D2082-). See item 27.
RPBY 817-347C 812-194C 6.
SPRING .540 O.D.X 1 1/4 X.054W 807-106C 7.
PIN CLEVIS 3/8 X 2 1/8 USABLE 805-154C 8.
PRESS WHEEL PIVOT TUBE 198-137D 9.
PARALLEL ARM PIVOT BUSHING 817-084C 10.
Rev.3 is not interchangeable
w/rev. 2
9/1/97+. Use with item 25. 98 1X12 PRESS WHEEL WELDMENT 199-022H 11.
Rev.2 is not interchangeable
w/rev. 1
(24' Drills S/N C1658 + & 30' Drills S/N
D1839 +)
1 X 12 PRESS WHEEL WELDMENT 199-020H 11.
1st rev. (24' Drills S/N C1657 - & 30' Drills S/N
D1838 -)
95 1 X 12 DBL V PW WELDMENT 199-017H 11.
HHCS 5/8-11X1 1/2 GR5 802-051C 12.
WASHER LOCK SPRING 5/8 PLT 804-022C 13.
1 X 12 MOLDED PRESS WHEEL RIM 817-081C 14.
HHCS 1/4-20X1 GR5 802-005C 15.
BEARING AA205DD 188-001V 16.
NUT-LOCK 1/4-20 PLT 803-007C 17.
2nd rev. 8/31/97-.Includes items 14 through 17
and 20
1 X 12 GP PRESS WHEEL ASSEMBLY 814-143C 18.
Use existing stock; 1st rev. Includes items 14 through 17 and 20 RPBY 814-143C 122-136S 18.
Includes items 2, 7, 8, 26 and 27. PW ADJUSTMENT TRUNNION ASSY 122-202S 19.
TIRE RUBBER 1 X 12 814-034C 20.
1 X 12 PRESS WHEEL RIM HALF 817-330C 21.
NUT HEX LOCK 1/4-20 FLG 803-088C 22.
HHCS 5/8-11X2 1/2 GR5 802-058C 23.
BRG .63ID PRESS WHL ASY 822-170C 24.
9/1/97+.Includes items 13, 15, & 20
thru 24.
1 X 12 PRESS WHL ASSY-5203BRG 814-174C 25.
2nd rev. T-HANDLE ASSEMBLY 817-328C 26.
2nd rev. (2N2410 S/N C1812+; 2N3010 S/N
D2083+)
OPENER TRUNION 817-347C 27.
01/31/14 - 133 - 196-126P Rev. A
Table of Contents Part Number Index
Press Wheels
1" x 12" Double Press Wheel
(Applies to 2N-2410 (1995+), 2N-3010 (1995+) only)