Great Plains P18432A Operator Manual - Manual (Page 37)

37 SLD
Operating Instructions
Measures in case of injury
through oil
Eyes:
Should any oil be splashed into your eyes,
rinse with water for 15 minutes. If the eye is
still irritated, contact a doctor immediately
If oil is swallowed
If oil is swallowed, it is important not to
induce vomiting. Contact a doctor imme-
diately.
Skin irritation caused by oil
In case of prolonged skin contact, wash off
the oil with soap and water.
Oil Spills
Use either sand or a suitable granular ab-
sorbent to soak up any spilt oil. Dispose of
the oil-contaminated absorbent in the proper
manner.
Oil Fires
Never use water to extinguish an oil fire.
The oil will float on the water causing the
fire to spread.
Burning oil/lubricant must be extinguished
using a carbon dioxide powder or foam
extinguisher. Always wear respiratory equip-
ment when dealing with fires of this type.
Waste Oil Disposal
Oil-contaminated waste and used oil must
be disposed of in accordance with current
legislation.
Waste oil must be collected and disposed of
in accordance with local regulations. Never
pour used oil into unsealed sewage systems
or drains or onto the ground.
5. Servicing and Maintenance
5.16 Lubricants &
Hydraulic Oil
Hydraulic System
The hydraulic fluid from the tractor is mixed
with the hydraulic fluid from the machine.
The supplied machine hydraulic system
contains Total AZOLLA ZS 32 oil.
Lubricants
S imba strongly recommend the use of
Lithium Complex EP2 Grease in the disc
and wheel hubs of your SLD. This grease
is a Lithium Complex soap dispersed in a
mineral oil and is interpreted by IARC as
being non-carcinogenic. Grease cartridges
are available from Simba (P12710). Using
this grease in combination with the labyrinth
type seal it is permissible to lengthen the
greasing interval on the disc hubs to 200
hours. If using a standard agricultural
grease the disc hubs should be lubricated
every 50 hours.
All other lubricating points on the machine
can be lubricated with multigrade lubricating
grease as specified in DIN 51825 KP/2K -
40.
Advantages of Lithium Complex EP2
Grease
 Excellent mechanical stability.
 Excellent load carrying properties.
 Wide temperature range.
 Excellent oxidation stability.
 Excellent water resistance.
 Compatibility with other greases.